Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Ejector Venturi Scrubber shopping experience:

1. Compare - without doubt the biggest advantage that the Ejector Venturi Scrubber offers shoppers today is the ability to compare thousands of Ejector Venturi Scrubber at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Ejector Venturi Scrubber? Wrong! If the Ejector Venturi Scrubber is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Ejector Venturi Scrubber then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Ejector Venturi Scrubber? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Ejector Venturi Scrubber and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Ejector Venturi Scrubber wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Ejector Venturi Scrubber then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Ejector Venturi Scrubber site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Ejector Venturi Scrubber, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Ejector Venturi Scrubber, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

This type of technology is a part of the group of air pollution controls collectively referred to as wet scrubbers.

An ejector or venturi scrubber is an industrial pollution control device, usually installed on the exhaust flue gas stacks of large furnaces, but may also be used on any number of other air exhaust gas systems.To this end, an ejector venturi scrubber (as well as the spray tower) uses a preformed spray, the difference is that only a single nozzle is used instead of many nozzles. This nozzle operates at higher fluid pressure and higher injection rates than those in most spray tower. The high-pressure spray nozzle (up to 689 pascal (unit) or 100 pound-force per square inch) is aimed at the throat section of a venturi effect constriction.

The ejector venturi is unique among available scrubbing systems since it can move the process gas without the aid of a blower or fan (implement). The liquid spray coming from the nozzle creates a partial vacuum in the side duct of the scrubber. This has the same effect as the water aspirator used in high school chemistry labs to pull a small vacuum for filtering precipitated materials (due to the Bernoulli effect). This partial vacuum can be used to move the process gas through the venturi as well as through the facility's process system. In the case of explosive or extremely corrosive atmospheres, the elimination of a fan in the system can avoid many potential problems.

The energy for the formation of scrubbing droplets comes from the injected liquid. The high pressure sprays passing through the venturi throat form numerous fine liquid droplets that provide turbulent mixing between the gas and liquid phases. Very high liquid-injection rates are used to provide the gas-moving capability and higher collection efficiencies. As with other types of venturis, a means of separating entrained liquid from the gas stream must be installed. Entrainment (engineering) separators are commonly used to remove remaining small droplets.

Particle collection Ejector venturis are effective in removing particles larger than 1.0 µm in diameter. These scrubbers are not used on submicrometer-sized particles unless the particles are condensable 1977. Particle collection occurs primarily by impaction as the exhaust gas (from the process) passes through the spray.

The turbulence that occurs in the throat area also causes the particles to contact the wet droplets and be collected. Particle collection efficiency increases with an increase in nozzle pressure and/or an increase in the liquid-to-gas ratio. Increases in either of these two operating parameters will also result in an increase in pressure drop for a given system. Therefore, an increase in pressure drop also increases particle collection efficiency. Ejector venturis operate at higher L/G ratios than most other particulate scrubbers (i.e., 7 to 13 l/m³ compared to 0.4-2.7 l/m³ for most other designs).

Gas collection Ejector venturis have a short gas-liquid contact time because the exhaust gas velocities through the vessel are very high. This short contact time limits the absorption efficiency of the system. Although ejector venturis are not used primarily for gas removal, they can be effective if the gas is very soluble or if a very reactive scrubbing reagent is used. In these instances, removal efficiencies of as high as 95% can be achieved 1977.

Maintenance problems Ejector venturis are subject to abrasion problems in the high-velocity areas - nozzle and throat. Both must be constructed of wear-resistant materials because of the high liquid injection rates and nozzle pressures. Maintaining the pump that recirculates liquid is also very important. In addition, the high gas velocities necessitate the use of entrainment separators to prevent excessive liquid carryover. The separators should be easily accessible or removable so that they can be cleaned if plugging occurs.

Summary Because of their open design and the fact that they do not require a fan, ejector venturis are capable of handling a wide range of corrosive and/or sticky particles. However, they are not very effective in removing submicrometer particles. They have an advantage in being able to handle small, medium and large exhaust flows. They can be used singly or in multiple stages of two or more in series, depending on the specific application.
Multiple-stage systems have been used where extremely high collection efficiency of particles or gaseous pollutants was necessary. Multiple-stage systems provide increased gas-liquid contact time, thus increasing absorption efficiency.
Table 1 lists the operating parameters for ejector venturis. * US EPA Air Pollution Training Institute developed in collaboration with North Carolina State University, College of Engineering (NCSU)

{| class="wikitable" style="width:100%; align:center; cellpadding:4"|-! colspan="6" style="height:50px; align:center" | Table 1. Operating characteristics of ejector venturis|-| align="center" width="12%" | Pollutant| align="center" | Pressure drop (Δp)| align="center" | Liquid-to-gas ratio (L/G)| align="center" | Liquid-inlet pressure (pL)| align="center" | Removal efficiency| align="center" | Applications|-| align="center" width="12%" | Gases| align="center" | 1.3-13 cm of water| align="center" | 7-13 l/m3| align="center" | 100-830 kPa| align="center" | 95% for very soluble gases| align="center" rowspan="2" | Pulp and paper industry
Chemical process industry
Food industry
Metals processing industry|-| align="center" width="12%" | Particles| align="center" | 0.5-5 in of water| align="center" | 50-100 gal/1,000 ft3| align="center" | 15-120 psig| align="center" | 1 µm diameter|}

Bibliography

References

This type of technology is a part of the group of air pollution controls collectively referred to as wet scrubbers.

An ejector or venturi scrubber is an industrial pollution control device, usually installed on the exhaust flue gas stacks of large furnaces, but may also be used on any number of other air exhaust gas systems.To this end, an ejector venturi scrubber (as well as the spray tower) uses a preformed spray, the difference is that only a single nozzle is used instead of many nozzles. This nozzle operates at higher fluid pressure and higher injection rates than those in most spray tower. The high-pressure spray nozzle (up to 689 pascal (unit) or 100 pound-force per square inch) is aimed at the throat section of a venturi effect constriction.

The ejector venturi is unique among available scrubbing systems since it can move the process gas without the aid of a blower or fan (implement). The liquid spray coming from the nozzle creates a partial vacuum in the side duct of the scrubber. This has the same effect as the water aspirator used in high school chemistry labs to pull a small vacuum for filtering precipitated materials (due to the Bernoulli effect). This partial vacuum can be used to move the process gas through the venturi as well as through the facility's process system. In the case of explosive or extremely corrosive atmospheres, the elimination of a fan in the system can avoid many potential problems.

The energy for the formation of scrubbing droplets comes from the injected liquid. The high pressure sprays passing through the venturi throat form numerous fine liquid droplets that provide turbulent mixing between the gas and liquid phases. Very high liquid-injection rates are used to provide the gas-moving capability and higher collection efficiencies. As with other types of venturis, a means of separating entrained liquid from the gas stream must be installed. Entrainment (engineering) separators are commonly used to remove remaining small droplets.

Particle collection Ejector venturis are effective in removing particles larger than 1.0 µm in diameter. These scrubbers are not used on submicrometer-sized particles unless the particles are condensable 1977. Particle collection occurs primarily by impaction as the exhaust gas (from the process) passes through the spray.

The turbulence that occurs in the throat area also causes the particles to contact the wet droplets and be collected. Particle collection efficiency increases with an increase in nozzle pressure and/or an increase in the liquid-to-gas ratio. Increases in either of these two operating parameters will also result in an increase in pressure drop for a given system. Therefore, an increase in pressure drop also increases particle collection efficiency. Ejector venturis operate at higher L/G ratios than most other particulate scrubbers (i.e., 7 to 13 l/m³ compared to 0.4-2.7 l/m³ for most other designs).

Gas collection Ejector venturis have a short gas-liquid contact time because the exhaust gas velocities through the vessel are very high. This short contact time limits the absorption efficiency of the system. Although ejector venturis are not used primarily for gas removal, they can be effective if the gas is very soluble or if a very reactive scrubbing reagent is used. In these instances, removal efficiencies of as high as 95% can be achieved 1977.

Maintenance problems Ejector venturis are subject to abrasion problems in the high-velocity areas - nozzle and throat. Both must be constructed of wear-resistant materials because of the high liquid injection rates and nozzle pressures. Maintaining the pump that recirculates liquid is also very important. In addition, the high gas velocities necessitate the use of entrainment separators to prevent excessive liquid carryover. The separators should be easily accessible or removable so that they can be cleaned if plugging occurs.

Summary Because of their open design and the fact that they do not require a fan, ejector venturis are capable of handling a wide range of corrosive and/or sticky particles. However, they are not very effective in removing submicrometer particles. They have an advantage in being able to handle small, medium and large exhaust flows. They can be used singly or in multiple stages of two or more in series, depending on the specific application.
Multiple-stage systems have been used where extremely high collection efficiency of particles or gaseous pollutants was necessary. Multiple-stage systems provide increased gas-liquid contact time, thus increasing absorption efficiency.
Table 1 lists the operating parameters for ejector venturis. * US EPA Air Pollution Training Institute developed in collaboration with North Carolina State University, College of Engineering (NCSU)

{| class="wikitable" style="width:100%; align:center; cellpadding:4"|-! colspan="6" style="height:50px; align:center" | Table 1. Operating characteristics of ejector venturis|-| align="center" width="12%" | Pollutant| align="center" | Pressure drop (Δp)| align="center" | Liquid-to-gas ratio (L/G)| align="center" | Liquid-inlet pressure (pL)| align="center" | Removal efficiency| align="center" | Applications|-| align="center" width="12%" | Gases| align="center" | 1.3-13 cm of water| align="center" | 7-13 l/m3| align="center" | 100-830 kPa| align="center" | 95% for very soluble gases| align="center" rowspan="2" | Pulp and paper industry
Chemical process industry
Food industry
Metals processing industry|-| align="center" width="12%" | Particles| align="center" | 0.5-5 in of water| align="center" | 50-100 gal/1,000 ft3| align="center" | 15-120 psig| align="center" | 1 µm diameter|}

Bibliography

References



 

Ejector Venturi Scrubber



 
Copyright © 2008 Hintcenter.com - All rights reserved.
Home | Terms of Use | Privacy Policy
All Trademarks belong to their repective owners. Many aspects of this page are used under
commercial commons license from Yahoo!